GET FREE SHIPPING!
When you order
$250 $100 or more.
Out Areas: Call for a quote.
USD $22.99 – USD $137.94
QUICK SILVER® Stainless Steel Rust Remover and Passivator is the best stainless steel cleaner for removing rust and stains from marine grade stainless steel (typically 304 or 316 grade) on boats, architectural stainless steel and other exterior stainless steel that is exposed to corrosive environments such as salt water, salt air, atmospheric fallout, pollution, corrosive chemicals, etc.
Rust and stain removal with QUICK SILVER® is quick, easy and safe. Just brush the environment friendly stainless steel cleaner onto the rusty surface, wait 5 to 30 minutes and rinse it clean, revealing bright, shiny and passivated stainless surface. After 24 hours, you can protect your stainless steel from further rusting and staining with long lasting STAINLESS SHIELD® clear coat.
Other unique features of QUICK SILVER® are its incredible penetrating power allowing it to penetrate deeply into rust pits and crevices to dissolve the rust, plus its chelating action which prevents re-deposition of the rust until it’s all rinsed away. QUICK SILVER® will also remove rust stain from fiberglass and most other surrounding surfaces. (Always test surrounding material first for effectiveness and safety)
QUICK SILVER‘s unique formula is designed to work quickly and easily on marine grade stainless steel with a minimum of labor. Simply brush it on, wait, and rinse it off. It’s the fastest acting, most effective rust remover for stainless steel available. Its gel formula clings to vertical surfaces for ease of use and this also prevents premature drying, allowing the rust removal and passivation action to continue for longer periods of time until the process is complete.
QUICK SILVER‘s unique formula is designed to work quickly and easily on marine grade stainless steel with a minimum of labor. Simply brush it on, wait, and rinse it off. It’s the fastest acting, most effective rust remover for stainless steel available. Its gel formula clings to vertical surfaces for ease of use and this also prevents premature drying, allowing the rust removal and passivation action to continue for longer periods of time until the process is complete
*TEST FIRST. QUICK SILVER® is generally safe for surrounding areas such as fiberglass, plastics, PVC, Hypalon and marine grade paint, but it’s important to test a small area first to make sure there is no detrimental reaction. When you’re sure that it works to your satisfaction, then continue to clean all your stainless steel.
**DWELL TIME. Do not allow QUICK SILVER® to remain on surface for more than 1 hour.
It seems redundant that you should brush off the rust and wash and degrease the surface before you clean off the rust but it makes perfect sense once you understand why. If you have excessive lose rust and dirt on the surface, you’re going to need more QUICK SILVER® to react with that before it even gets a chance to clean the rust from your stainless steel and the dirt will just inhibit the chemical reaction to nullify its effect. Quickly brushing off lose rust and dirt with a nylon bristled scrub brush will allow the rust cleaner to get to where it needs to be much faster and easier. In the end it will save you time and money. If you only have rust stains, you can skip this step. Washing and degreasing is also important to allow QUICK SILVER® to work properly; if there are oily pollutants on the surface, even if they’re not visible, they can prevent the QUICK SILVER® stainless steel cleaner from doing its job properly and you could wind up with residue corrosion and an uneven finish.
Never use a wire brush, steel wool scouring pads or sandpaper to clean off the excessive rust and dirt. First of all, they will scratch the surface and second they will leave behind traces of iron or steel which will act as initiators or seeds to start further rusting.
There are many stainless steel cleaners and polishes on the market, but the problems are that they typically require hard scrubbing, rubbing and polishing and as soon as the stainless steel is clean, it begins to rust again. Crevices and pits could not be cleaned properly leaving residual rust which acts as an initiator to start the rusting and staining process all over again. Chemical cleaners work better but still have the problem of not restoring the protective chromium oxide layer in order to passivate the metal. This has to be done in a separate procedure, which us usually skipped. If allowed to continue, the bright, shiny, stainless steel soon begins to corrode and pit.
The reason that QUICK SILVER® is the best Stainless Steel cleaner and rust remover is that its new technology dissolves rust, cleans stains and re-passivates the stainless steel all in one easy step, saving countless hours of labor and eliminating the need for removing the stainless steel for passivation with hazardous chemicals at high temperatures. The stainless steel can be cleaned, brightened and re-passivated in place, on your boat or on site.
QUICK SILVER® is a gel based formula. The higher viscosity makes the product sticky and controls the release of the active ingredients to allow the material to cling to vertical surfaces and work at rust removal for longer effective periods of time. The chelating ingredients hold the offending residue in suspension so that the creation of protective chromium oxide, known as passivation, can be generated on the surface to prevent flash rusting and retard future rusting after it’s rinsed off.
In keeping with Aurora Marine’s mandate, QUICK SILVER® is Environment Friendly. It’s water based and Biodegradable. Being Environment Friendly is important as often times the stainless steel fittings and rails etc. on a boat will need to be cleaned while the boat is in the water. It’s reassuring to know that the effluent that is rinsed into the water will have a minimum impact of the water and marine life.
When your stainless steel is clean, passivated and dry it’s encouraging to know that you can easily protect it against further degradation and the necessity for repeated cleaning by applying STAINLESS SHIELD® clear coat. It will seal your stainless surfaces against attack for salt water, salt air and other environmental and chemical pollutants, eliminating the necessity for constantly cleaning and maintain your boat fittings and railings.
This protective coating is durable and long lasting and will give you more time to enjoy your boat and require less time to maintain it. STAINLESS SHIELD® is a clear, water based polymeric coating formulated especially for Stainless Steel. It displays excellent performance as a direct to metal finish with excellent adhesion and water resistanceand no primer is required. STAINLESS SHIELD® dries to a hard and durable, clear, shiny, finish with very low VOC’s and without any hazardous ingredients. It’s safe to use, biodegradable and environment friendly.
Understanding Stainless Steel is a bit confusing. Most people wonder why it rusts, pits and stains when it’s supposed to be stainless. In fact, there are many grades of stainless steel, each alloy designed for a specific purpose. They are blends of mild steel with various concentrations of chromium, nickel, molybdenum and other ingredients that effect its strength, workability, weld ability, ability to resist (but not entirely eliminate) corrosion, etc. Marine grade typically refers to 304 and 316 grades, but there are other variations, with 316 being the most resistant to salt water and chemical attack.
The way that stainless steel works is that it forms a microscopic layer of chromium oxide on the surface that is highly resistant to corrosion; its Passive State. It requires a constant state of interaction with oxygen in the air or flowing water to maintain this chromium oxide layer. If this oxygen interaction is disrupted by abrasion, or inhibited by the presence of stagnant water where the oxygen is depleted or deposition of chlorides from salt water or salt air, preventing the oxidation process to continue, the passive stainless steel layer reverts back to its Active State, similar to that of mild steel. It then begins to corrode or rust all over again.
Another common factor that affects the performance of stainless steel is mild steel or iron contamination. Even minor traces of steel or iron on the surface can act as an initiator or seed for rust to begin developing. Once started, it deprives the natural oxidation process, and it can spread rapidly and burrow deep into the metal to create corrosive pits and crevices. This can occur from abrasion contact with a piece of steel or even the use of steel bit screwdrivers, sockets or wrenches used to tighten screws and bolts during the construction of your boat. Trace amounts of iron are transferred from the tool to the head of the bolt or the nut, or the chromium oxide layer is ruptured from the torque, and that starts the rusting process.
In addition to being unsightly, if left untreated, the stainless steel fitting, bolt, chain or other part can fail and break with considerable negative consequence.
In addition to cleaning your stainless steel, and removing the rust, it’s also important to make the stainless passive again by restoring the chromium oxide layer. In addition to removing the rust and deep cleaning the metal, QUICK SILVER® also recreates the chromium oxide layer to re-passivate the surface. This will keep your stainless steel shiny and rust free, at least until it’s attacked by another bout of oxygen deprivation by salt or rust initiation by iron, etc.
The good news is that now you can add considerablelong term protection by sealing your stainless steel with STAINLESS SHIELD®. Salt and pollutants can’t penetrate it. It can last a whole year or longer.
Keeping your new RIB or Inflatable Boat clean and protected against environmental damage can easily double the useful life of your boat, keep it looking like the day you bought it, increase your pride of ownership and bring a much higher return when it comes time to trade up or sell.
Your boat will be expected to live and survive in the Marine Environment; the toughest environment on the planet. It will be under constant attack from dirt, grime, UV, infrared, suntan lotion, marine growth, bacteria, bird and spider droppings, scuffs, stains, ozone and more. A simple and regular maintenance regime can easily defeat these ravages, but you need the right specialty products and procedure to do the job. Failure to keep your boat clean and protected will result in it looking old and tired before its time, may void your warranty and is sure to bring additional problems that can be costly to repair.
Using the right products to care for your boat is important. Household, automotive and industrial products can often cause more harm than good and should not be used. Aurora Boat Care Products are specially formulated for optimum care and maintenance of RIB and Inflatable boats. They’re endorsed, recommended and used by the top boat manufacturers in the world. These products are safe to use on Hypalon, PVC, Polyurethane, Rubber, Fiberglass and Aluminum.
NOTE: Detailed instructions for use and application of all products are on the product labels and on www.AuroraMarine.com
This is the easiest and best time to protect your boat. Within a few months in the marine environment, an unprotected boat can become soiled, stained, fouled and begin to degrade, requiring restoration before it can be properly protected.
When the special fabric for your tube and inflatable floor was manufactured, lubricants and other chemicals were used and they remain on the surface of the fabric after the boat was manufactured. It’s important to strip them away before applying the UV protector otherwise poor adhesion and failure of the protector can result. Even though your boat is new and appears clean, scrub it well with SPEED CLEAN™ and a MARINE POWER MITT™ to remove these pollutants, rinse well and dry. When the tube and fabric floor is dry, apply 2 coats of POLY GUARD™. These products may also be used to protect rub rails and other rubber fitments.
If the boat is to remain in the water for more than 2 days at a time, apply REPELIN™ fouling release coating to all underwater fabric surfaces to reduce the attachment of marine fouling and make cleanup easier. REPELIN™ can also improve performance and reduce fuel consumption. These products are effective for use in salt as well as fresh water.
If your RIB is to remain in the water for more than 2 days at a time, protect the gel coat with REPELIN™ fouling release coating. In addition to reducing the attachment of marine fouling it will keep the bottom cleaner, eliminate salt attachment, improve performance and reduce fuel consumption. Gel coat is porous and REPELIN™ will seal the pores to prevent osmosis blisters.
New gel coat is coated with a mold release agent which can impair proper bonding of long lasting protective coatings. To ensure proper attachment of REPELIN™, the hull must be scrubbed with SPEED CLEAN™ and a MARINE POWER MITT™ to remove any pollutants, prior to application.
If your RIB is to remain in the water for more than 2 days at a time, protect the painted bottom with REPELIN™ fouling release coating. In addition to reducing the attachment of marine fouling it will keep the bottom cleaner, eliminate salt attachment, improve performance and reduce fuel consumption. Wash the surface first with INFLATABLE BOAT CLEANER™ to remove any pollutants and then apply 2 coats of REPELIN™. If the hull is raw aluminum, after washing as above, coat it first with ALUMETRON™ prior to applying REPELIN™.
The deck or floor surfaces of RIB’s either have a textured pattern or sand is imbedded in the gel coat, or paint, in order to provide traction and reduce slipping, especially when wet. Protecting them with wax or polish is not recommended as it can make them dangerously slippery. Left unprotected, the decks are susceptible to UV damage, soiling, staining and excessive scrubbing to keep them clean. SURE STEP™ is a pressure sensitive sealer and UV protective polish that utilizes Adaptive Reflex technology. It seals the surface, protects the New Boat shine and makes the decks easy to maintain and keep clean. When you step on the deck, your weight creates pressure which gives you grip. When you take your foot off, releasing the pressure, they become smooth and slippery again making dirt attachment difficult. When the decks are wet, the traction increases even more.
Scrub the non-skid deck with SPEED CLEAN™ and a scrub brush and the smooth parts with a MARINE POWER MITT™. Rinse well and dry. Apply 2 coats of SURE STEP™ and buff to a beautiful shine with a SURE STEP BUFFING WHEEL™ on a portable drill.
Once your boat is properly protected, maintenance usually consists of keeping it clean by rinsing with clear water and wiping dry from time to time but if stuff happens, we’ve got you covered. If your boat gets soiled from greasy atmospheric fall out, diesel soot, scum line, or other nasties, wet it with water, spray on some free rinsing, biodegradable INFLATABLE BOAT CLEANER™, wash away the grime with a MARINE POWER MITT™ and wipe dry with a chamois or microfiber cloth.
Scuff marks or other dirt or stains that are difficult to remove can be scrubbed clean with SPEED CLEAN™. Rinse well, dry and re-apply POLY GUARD™ and REPELIN™ if applicable.
Even though your boat bottom is protected with REPELIN™, if it sits in the water for more than a few days you may see slime forming on the bottom. Simply wipe off the slime and the bottom will stay clean for months. If the boat sits in the water for long periods of time, without maintenance, marine growth may attach. Soft growth such as slime and algae can be removed with INFLATABLE BOTTOM SPRAY™. Hard growth, such as barnacles or zebra or quagga mussels can be removed with FOUL OFF™. Bottom cleaners can remove REPELIN™ and POLY GUARD™. After removing the growth, scrub with SPEED CLEAN™ and re-apply POLY GUARD™ and REPELIN™.
POLY GUARD™, REPELIN™ and SURE STEP™ have a life of 6 to 8 months in continental climates and 3 to 4 months in tropical climates. At the end of each period, scrub all surfaces with SPEED CLEAN™ and re-apply the protectors. Regular use of these products can extend useful life of your new RIB or Inflatable Boat, make maintenance easier and add value and pride of ownership to your boat.
Dissolves Rust, Cleans, Brightens, Passivates Stainless Steel in 1 Easy Step. Deep Cleans Pits. Chelating Prevents Re-deposition of Rust. Gel Based Formula Clings to Vertical Surfaces.
Remove loose dirt and rust before application. Remove oil & greases with BOAT CLEAN PLUS®. Do not allow QUICK SILVER™ to dry or remain on surface more than 1 hr.
SURFACE RUST. 1) Brush on. let sit for 5 to 15 minutes. 2) Rinse clean. HEAVY RUST & PITTING. Brush on. Let sit for 15 to 30 minutes. Rinse clean. Repeat if required. SEVERE RUSTING may require scrubbing with MARINE POWER MITT® or scrub brush.
MAY IRRITATE EYES AND SKIN. Can cause eye damage. May be harmful if swallowed. Do not swallow. Do not get in eyes or on skin or clothing. Keep out of reach of children. Handle with care. Wear protective gloves/clothing and eye/face protection when mixing or using.
Contains Oxalic Acid (1%-5%). If medical advice is needed, have product container or label at hand. If swallowed, call a Poison Control Centre or doctor immediately. Do not induce vomiting.
We Ship to 48 contiguous US States & Canada (Out areas call for Quote. Please note we do not ship to PO Boxes.) for a flat rate of only $10.95 delivered to your door.
When you order $100 or more.
For International Shipping Call for a quote.
AURORA QUICK SILVER ®
Catalog No: 11320
Individual Unit: 450 ml
Shipping Weight: 1.21 lb
Case Volume: 12 X 450 ml
Case Weight: 14.5 lb (6.58 kg)
Case Dimensions: 7.8″L x 10.3″W x 8″H
How to Use
Locate a Dealer in Your Area
System Matched™ Products
Environment Safe Boat Care
Ask the Skipper: For All Your Boating Questions
Aurora Marine Club: Free Membership