Thank You for your order. All of us at Aurora Marine hope you enjoy using our products as much as we enjoyed making them for you.
USD $18.99
MARINE POWER MITT™ cuts your Boat Cleaning time in 1/2! The Perfect Boat Cleaning Accessory for use with Aurora ALUMABUFF™, BOAT SCRUB™, BOAT CLEAN PLUS™, SPEED CLEAN™ and BLACK STREAK REMOVER™. It turbocharges the scrubbing and cleaning action without scratching. The proprietary synthetic material we use is made of Micro Fine Fibers that gets into the tiniest crevices to scrub away dirt and grime that other tools can’t reach.
In stock
Turbo Charges Boat Cleaning Action without Scratching! Use with: ALUMABUFF™, BLACK STREAK REMOVER™, BOAT CLEAN PLUS™, BOAT SCRUB™, SPEED CLEAN™. MARINE POWER MITT™ will not scratch your aluminum, fiberglass or painted surface. Best to use with our boat care products. Reusable. Rinse & Let Dry After Use
Perfect Boat Cleaning Accessory For . . .
| Use with ALUMABUFF™ to Remove Stains & Streaks from tight areas of Aluminum & Pontoon Boats that can’t be reached with a Linear Buffer. | Use with BLACK STREAK REMOVER™ to Instantly Wipe Away Ugly Black Streaks. |
 |
 |
| Use with BOAT CLEAN PLUS™ for Wax Stripping & Deep Cleaning Prior to Applying Premium Boat Shine ™. | Use with BOAT SCRUB™ to Remove Oxidation, Yellowing & Stains. |
 |
 |
Use with SPEED CLEAN™ to Strip Tough Grime, Stains & Oxidation from Inflatables. |
|
 |
Keeping your new RIB or Inflatable Boat clean and protected against environmental damage can easily double the useful life of your boat, keep it looking like the day you bought it, increase your pride of ownership and bring a much higher return when it comes time to trade up or sell.
Your boat will be expected to live and survive in the Marine Environment; the toughest environment on the planet. It will be under constant attack from dirt, grime, UV, infrared, suntan lotion, marine growth, bacteria, bird and spider droppings, scuffs, stains, ozone and more. A simple and regular maintenance regime can easily defeat these ravages, but you need the right specialty products and procedure to do the job. Failure to keep your boat clean and protected will result in it looking old and tired before its time, may void your warranty and is sure to bring additional problems that can be costly to repair.
Using the right products to care for your boat is important. Household, automotive and industrial products can often cause more harm than good and should not be used. Aurora Boat Care Products are specially formulated for optimum care and maintenance of RIB and Inflatable boats. They’re endorsed, recommended and used by the top boat manufacturers in the world. These products are safe to use on Hypalon, PVC, Polyurethane, Rubber, Fiberglass and Aluminum.
NOTE: Detailed instructions for use and application of all products are on the product labels and on www.AuroraMarine.com
This is the easiest and best time to protect your boat. Within a few months in the marine environment, an unprotected boat can become soiled, stained, fouled and begin to degrade, requiring restoration before it can be properly protected.
When the special fabric for your tube and inflatable floor was manufactured, lubricants and other chemicals were used and they remain on the surface of the fabric after the boat was manufactured. It’s important to strip them away before applying the UV protector otherwise poor adhesion and failure of the protector can result. Even though your boat is new and appears clean, scrub it well with SPEED CLEAN™ and a MARINE POWER MITT™ to remove these pollutants, rinse well and dry. When the tube and fabric floor is dry, apply 2 coats of POLY GUARD™. These products may also be used to protect rub rails and other rubber fitments.
If the boat is to remain in the water for more than 2 days at a time, apply REPELIN™ fouling release coating to all underwater fabric surfaces to reduce the attachment of marine fouling and make cleanup easier. REPELIN™ can also improve performance and reduce fuel consumption. These products are effective for use in salt as well as fresh water.
If your RIB is to remain in the water for more than 2 days at a time, protect the gel coat with REPELIN™ fouling release coating. In addition to reducing the attachment of marine fouling it will keep the bottom cleaner, eliminate salt attachment, improve performance and reduce fuel consumption. Gel coat is porous and REPELIN™ will seal the pores to prevent osmosis blisters.
New gel coat is coated with a mold release agent which can impair proper bonding of long lasting protective coatings. To ensure proper attachment of REPELIN™, the hull must be scrubbed with SPEED CLEAN™ and a MARINE POWER MITT™ to remove any pollutants, prior to application.
If your RIB is to remain in the water for more than 2 days at a time, protect the painted bottom with REPELIN™ fouling release coating. In addition to reducing the attachment of marine fouling it will keep the bottom cleaner, eliminate salt attachment, improve performance and reduce fuel consumption. Wash the surface first with INFLATABLE BOAT CLEANER™ to remove any pollutants and then apply 2 coats of REPELIN™. If the hull is raw aluminum, after washing as above, coat it first with ALUMETRON™ prior to applying REPELIN™.
The deck or floor surfaces of RIB’s either have a textured pattern or sand is imbedded in the gel coat, or paint, in order to provide traction and reduce slipping, especially when wet. Protecting them with wax or polish is not recommended as it can make them dangerously slippery. Left unprotected, the decks are susceptible to UV damage, soiling, staining and excessive scrubbing to keep them clean. SURE STEP™ is a pressure sensitive sealer and UV protective polish that utilizes Adaptive Reflex technology. It seals the surface, protects the New Boat shine and makes the decks easy to maintain and keep clean. When you step on the deck, your weight creates pressure which gives you grip. When you take your foot off, releasing the pressure, they become smooth and slippery again making dirt attachment difficult. When the decks are wet, the traction increases even more.
Scrub the non-skid deck with SPEED CLEAN™ and a scrub brush and the smooth parts with a MARINE POWER MITT™. Rinse well and dry. Apply 2 coats of SURE STEP™ and buff to a beautiful shine with a SURE STEP BUFFING WHEEL™ on a portable drill.
Once your boat is properly protected, maintenance usually consists of keeping it clean by rinsing with clear water and wiping dry from time to time but if stuff happens, we’ve got you covered. If your boat gets soiled from greasy atmospheric fall out, diesel soot, scum line, or other nasties, wet it with water, spray on some free rinsing, biodegradable INFLATABLE BOAT CLEANER™, wash away the grime with a MARINE POWER MITT™ and wipe dry with a chamois or microfiber cloth.
Scuff marks or other dirt or stains that are difficult to remove can be scrubbed clean with SPEED CLEAN™. Rinse well, dry and re-apply POLY GUARD™ and REPELIN™ if applicable.
Even though your boat bottom is protected with REPELIN™, if it sits in the water for more than a few days you may see slime forming on the bottom. Simply wipe off the slime and the bottom will stay clean for months. If the boat sits in the water for long periods of time, without maintenance, marine growth may attach. Soft growth such as slime and algae can be removed with INFLATABLE BOTTOM SPRAY™. Hard growth, such as barnacles or zebra or quagga mussels can be removed with FOUL OFF™. Bottom cleaners can remove REPELIN™ and POLY GUARD™. After removing the growth, scrub with SPEED CLEAN™ and re-apply POLY GUARD™ and REPELIN™.
POLY GUARD™, REPELIN™ and SURE STEP™ have a life of 6 to 8 months in continental climates and 3 to 4 months in tropical climates. At the end of each period, scrub all surfaces with SPEED CLEAN™ and re-apply the protectors. Regular use of these products can extend useful life of your new RIB or Inflatable Boat, make maintenance easier and add value and pride of ownership to your boat.
VS721 makes it difficult for marine growth to attach. If you keep the slime off by wiping with a sponge or Marine Power Mitt, as it starts to appear you should be able to keep it clean for up to 6 months without re-application. Using Boat Scrub for regular maintenance is not recommended as it will strip the coating. VS721 is very durable and has been tested at speeds up to 145 mph and found to still be effective 6 months later. The only maintenance required is to wipe the slime off as it appears. That way it won’t get a grip or become food for higher life forms which then can also attach.
VS721 will also seal the pores in the gelcoat to prevent osmosis blistering and give you better performance and fuel economy. It will make launching and hauling onto your trailer much easier as well
The first product to try is Boat Scrub. Simply apply a small amount to a soft cloth and rub out the stain. If you have a lot of these marks, I recommend using a Marine Power Mitt with the Boat Scrub. It will save a lot of labor.
First you need to clean the dirt, bacteria, pollutants and oxidation from the surface and clean out the pores. To do this, wash the deck with a 1:4 solution of Boat Clean Plus and water, using a Marine Power Mitt or sponge with some aggressive rubbing, and rinse clean. This will get rid of all the surface pollution.
You should be able to get them out with a 50/50 solution of Boat Clean Plus and Boat Scrub and a bit of rubbing. Use a scrub brush on non-skid areas and a Marine Power Mitt on the smooth areas, or try a soft cloth but it will require more rubbing. This is the formula that many boat builders use to remove tough stains and yellowing from Carnauba Wax.
If all the stain does not come out, let the sun help you. Leave the deck exposed to the sun for a week or two without any protection on the damaged area.
When you get the stains out, protect your deck with Sure Step to prevent stains in the future.
Boat Scrub does a great job of cleaning fenders. Use it full strength from the bottle and scrub away the dirt and grime with an Aurora Scrub Mitt or aggressive cloth, like a piece of carpeting or terry towel. A scrub brush can also be used, especially to get in around ridges, nooks and crannies. If the grime is really ground in, pre-wet the fender with Boat Clean before cleaning with Boat Scrub.
Two coats of Vinyl Guard, after you have cleaned and rinsed your fenders, will put a protective polish on them that will restore the shine and help resist dirt in the future.
The best way to maintain your beautiful new finish is simply to keep it clean. Wash as required with a solution of 1 part Boat Clean Plus to 15 or 20 parts water in a bucket. Rinse your boat first, and while it is still wet, wash it with the Boat Clean Plus solution, using a mop, sponge or soft cloth. For best results, wash it in the shade, early morning or at dusk when it’s not too hot. Start at the top, at the bow and work back and down. Work in sections and make sure that you rinse the solution off before it dries and dry with a Boat Chamois.
We Ship to 48 contiguous US States & Canada (Out areas call for Quote. Please note we do not ship to PO Boxes.) for a flat rate of only $10.95 delivered to your door.
When you order $100 or more.
For International Shipping Call for a quote.
AURORA MARINE POWER MITT™
Catalog No: 11230
Individual Unit: 1 Mitt
Shipping Weight: 0.33 lb
Case Volume: 12 pkgs
Case Weight: 8.8 lb (3.99 kg)
Case Dimensions: 7.8″L x 11.5″W x 5.8″H
Useful Links
Locate a Dealer in Your Area
System Matched™ Products
Satisfaction Guarantee
Environment Safe Boat Care
Ask the Skipper: For All Your Boating Questions
Aurora Marine Club: Free Membership
No account yet?
Create an Account
Skipper –
looks brand new!
First, of like to thank you for your time and effort with my boat cleaning endeavor. You seemed determined not to have a disappointed costumer. I am far from disappointed. In fact, I am truly amazed about how well your products worked. I admit I was skeptical at first, but with your guidance and advice, my boat truly looks brand new!
As you suggested, I started with Inflatable Boat Cleaner, then used Speed Clean and the Marine Power Mitt and finally two coats of Poly Guard. Wow!
Again, I thank you.
Review by Steve Potter
Skipper –
What a Great Time Saver
I tried your Marine Power Mitt with Boat Scrub (which I love) last spring and it got all the oxidation off my hull in 1 1/2 hours. This job used to take me 4 hours. I bought 2 more, one for my son and daughter so they can help dad get the boat pristine. They seem to last a long time. Great tool. Worth every penny.
Review by Ron Bullard